Wanway s20 notification problem solved

Jeruso3 months ago

Good afternoon, first of all forgive me for the English, since I use Google Translate.

I have experienced many problems with notifications from this device on both 2g and 4g

All the tests I have carried out so far have been successful, both in traccar, firebase, telegram

I wanted to share with you for all of you who have had problems with the same case, so that it can be solved, since I have looked at thousands of posts and each one was different and none of them worked.

It was not a problem with the server, but with the device, since the server has its time, and the device comes from GMT+8 origin, so it did not work, since it was not the correct time.

The server, you have to set it to your country's time

You have to send an SMS to the device with the following command:

GMT,E,0,0# (I am from Spain).

You have to choose the time letter of your time zone, but leave 0.0, since then the device is set to the same time as the server, and thus be able to receive the notification at the server time, and you cannot have the device at one time and the server at another, because then it does not send the notification, which is the problem

Also send this command by SMS for geozones

DFS_ON#

I hope it helps you, since since I configured it like this, everything has been perfect in notifications....

The version of my traccar is v6.2

Tested in own app with firebase, official traccar app and telegram, 100%

Greetings and thank you Antón for your great work, without you we are nothing

Anton Tananaev3 months ago

Tracker and server shouldn't have the same timezone. Tracker just have to send UTC time.

Jeruso3 months ago

I have the server Etc/GMT-2 and the device GMT E ,0,0, is with a different time, but doing tests and tests and more tests, setting the device to 0.0 I get all the notifications