What made you think that? I think you should read following page:
https://www.traccar.org/ports-for-tk-gt-and-other-gps-devices/
I had previously set up a TK816 on 5093 but I was not seeing after re setting up any attempted calls on port 5093 in the log file. It turned out it was to do with the sim and the roaming profile it was attached to. So I was starting to question what I had noted regarding the tracker setup. I now have it working fine on 5093.
2017-03-15 07:20:46 DEBUG: [76E0C8D2: 5093 < 208.80.156.8] HEX: 5b53472a383136313236303135362a303039392a55442c3135303331372c3037323033312c412c35302e3636303233332c4e2c332e3239373331372c572c302e303535352c3030302c312c30372c39302c3130302c302c35302c30303030303030302c342c312c3233342c31302c32313433302c32313930372c3134382c32313433302c31373833322c3134332c353131392c32333236362c3134302c32313433302c31363438312c3133382c2c30305d 2017-03-15 07:20:46 INFO: [76E0C8D2] id: 8161260156, time: 2017-03-15 07:20:31, lat: 50.66023, lon: -3.29732, speed: 0.0, course: 0.0
Thanks you
Hi!
Can anybody tell me, why with this device I can't see the address ? The field Address is blank.
Here is a printscreen: http://imgur.com/a/wbMby
For example with the TK909 from the same supplier I can see the address.
Thanks in advance!
Problem solved.
Another thing:
How can I filter those positions ? (Attached printscreen)
http://imgur.com/a/m6qnV
After car stops I dont want to receive GPS coordinates like this until the device goes to sleep mode (5 minutes)
Any ideea?
Thanks!
You can filter those positions by distance.
Yes,
This is what I have done :)<entry key='filter.distance'>20</entry>
The value is rather small. I would recommend around 50. Also, make sure you enabled filtering.
The filter is enabled and until now the value it's ok, no more data receiving.
Thanks for the support!
CCPlusIT, I have have a TK816 which I'm struggling to setup as a newbie. I have it working on http://mytkstar.net but I'd dearly like to get it working within the Traccar setup.
Anton had recommended I ask the vendor for information but they refer me back to the instructions supplied which does not help with Third Party installs.
Any help greatly appreciated as it's a great little product and Traccar is a wonderful application.
@stephenc you must set the obd tracker to point to your traccar server .
to set the ip and port, the sms command is: adminip123456 ip port (example: adminip123456 89.12.58.96 5093)
For this device you can use watch protocol (port 5093)
Thanks hory, I don't actually have my own traccar server as I was using the http://demo.traccar.org/ so far until I get a handle on how this all works. Is it possible to use it on the demo server please?
Stephen Belfast city-hall looking well in the background, Give me a call on 07451244887 I can help you as local to you, Hope Jane is well
Cheers M
Hello,
port 5093 works well.
cheers T.
I thought the port for the TK816 was 5093 or am I incorrect? If not does anyone have the port Id.
Thanks in advance