Hi!
I got a TK103 clone that connect and disconnect from server without send any data:
It works with default service provider, and this service says that Device type is TK200, but i can't find anything about this model or device.
I already:
tested the same device with default service provider and it works fine;
configured IP and Port to traccar installed on my server (others devices works fine in my server);
send SMS commands to configure APN, enable GPRS in TCP mode, start tracker and start to send 'fix' data;
tried all ports from Supported Devices and Chinese Clones
But all I got from this device is connectd/IOException/disconnected:
2018-07-06 19:56:56 INFO: [9622D0D2] connected
2018-07-06 19:56:56 WARN: [9622D0D2] error - Connection reset by peer - IOException (...)
2018-07-06 19:56:56 INFO: [9622D0D2] disconnected
2018-07-06 19:57:13 INFO: [02D3F310] connected
2018-07-06 19:57:13 WARN: [02D3F310] error - Connection reset by peer - IOException (...)
2018-07-06 19:57:13 INFO: [02D3F310] disconnected
2018-07-06 19:57:28 INFO: [C897D458] connected
2018-07-06 19:57:28 WARN: [C897D458] error - Connection reset by peer - IOException (...)
2018-07-06 19:57:28 INFO: [C897D458] disconnected
2018-07-06 19:57:45 INFO: [61AFF7F9] connected
2018-07-06 19:57:45 WARN: [61AFF7F9] error - Connection reset by peer - IOException (...)
2018-07-06 19:57:45 INFO: [61AFF7F9] disconnected
2018-07-06 19:57:58 INFO: [FD2DB40D] connected
2018-07-06 19:57:58 WARN: [FD2DB40D] error - Connection reset by peer - IOException (...)
2018-07-06 19:57:58 INFO: [FD2DB40D] disconnected
2018-07-06 19:58:13 INFO: [CBFE0C49] connected
2018-07-06 19:58:13 WARN: [CBFE0C49] error - Connection reset by peer - IOException (...)
2018-07-06 19:58:13 INFO: [CBFE0C49] disconnected
2018-07-06 19:58:28 INFO: [5B1CAA5C] connected
2018-07-06 19:58:28 WARN: [5B1CAA5C] error - Connection reset by peer - IOException (...)
2018-07-06 19:58:28 INFO: [5B1CAA5C] disconnected
2018-07-06 19:58:45 INFO: [3CDBCAD1] connected
2018-07-06 19:58:45 WARN: [3CDBCAD1] error - Connection reset by peer - IOException (...)
2018-07-06 19:58:45 INFO: [3CDBCAD1] disconnected
2018-07-06 19:58:58 INFO: [A0098EED] connected
2018-07-06 19:58:58 WARN: [A0098EED] error - Connection reset by peer - IOException (...)
2018-07-06 19:58:58 INFO: [A0098EED] disconnected
Any hints about what to do?
Thanks!
Dear Robson,
Could you please help me to comunicate with GPS Tracker ?
I have purchased a clone (chinese) device GPS Tracker type TK103B (your image looks like exactly the same) and have some problems to use it, please let me say to you what I have done:
First basic configurations and test Ok(begin, centernum, timezone, check, smslink)
When I configure APN, the result is Ok.
My location is Ecuador, the APN configuration I am using is ...
SMS Command:
APN123456 internet.movistar.com.ec movistar movistar
Response:
APN,CONFIG OK
- Testing connection to server, I can not access to the device from server.
I am trying to connect from server (IP:121.201.110.210 Port: 8989) http://secumore1818.com/
SMS Command:
adminip123456 121.201.110.210 8989
Response:
ADMINIP,CONFIG OK
SMS Command:
GPRS123456 1
Response:
GPRS,CONFIG OK
- After that configurations, do not have any more responses to sending sms commands (smslink, check).
I will appreciate any sugestion.
Thank you in advance for your help.
Hi!
I got a TK103 clone that connect and disconnect from server without send any data:
It works with default service provider, and this service says that Device type is TK200, but i can't find anything about this model or device.
I already:
tested the same device with default service provider and it works fine;
configured IP and Port to traccar installed on my server (others devices works fine in my server);
send SMS commands to configure APN, enable GPRS in TCP mode, start tracker and start to send 'fix' data;
tried all ports from Supported Devices and Chinese Clones
But all I got from this device is connectd/IOException/disconnected:
Any hints about what to do?
Thanks!