Teltonika FMB120 Input DIN status

scyhe6 years ago

Hello, can i show on Attribute list current status ( 1 or 0 ) from DIN2 , DIN3 inputs FMB120 ? DIN1 is reserved for ignition and it works ok.

Anton Tananaev6 years ago

It will show automatically as long as your device reports those values.

scyhe6 years ago

It is RAW data from logs:

2018-10-25 13:19:16  INFO: [9fe59e52: 5027 < 37.47.170.207] HEX: 000000000000003f080100000166aaf32368000b572cd31db1d77c0176005a0e0000000c06ef01f00150011504c800450106b5000bb60008423b6218000043100c44000700000100004882
2018-10-25 13:19:16  INFO: [9fe59e52: 5027 > 37.47.170.207] HEX: 00000001
2018-10-25 13:19:16  INFO: [9fe59e52] id: 352093085582525, time: 2018-10-25 13:19:13, lat: 49.xx943, lon: 19.yy625, course: 90.0

In DB record i have this attributes:

{"priority":0,"sat":12,"event":0,"ignition":true,"motion":true,"workMode":1,"rssi":4,"io200":0,"gpsStatus":1,"pdop":1.1,"hdop":0.8,"power":15.195,"io24":0,"battery":4.108,"io68":7,"distance":0.0,"totalDistance":290.8,"hours":11043000}

scyhe6 years ago

SOLVED, I had bug in I/O configuration at my device.