Starlink SVR

Could any one help me, how to configure starlink SVR model tracking devices with traccar

Not sure about device side configuration, but you should use port 5136. Also, you need to configure starlink.format parameter.

Hi, I have the following format in the wrapper.conf file:

starlink.format=#EDT#,#EID#,#PDT#,#LAT#,#LONG#,#SPD#,#HEAD#,#ODO#,#IN1#,#IN2#,#IN3#,#IN4#,#OUT1#,#OUT2#,#OUT3#,#OUT4#,#LAC#,#CID#,#VIN#,#VBAT#,#DEST#,#IGN#,#ENG#

However it does not interpret the device string.
String HEX

24534c553031373731302c30362c313436362c3139303732363136323934352c30312c3139303732363136323934332c2d333332362e393633372c2d30373033382e383531332c3030302e302c3032392c3030303035302c312c312c312c302c302c302c302c302c31333530322c38363735373231312c31332e3633382c30342e3032312c2c312c312c312c322a36343c0d0a

HEX to ASCII

$SLU017710,06,1457,190726162215,01,190726162213,-3326.9637,-07038.8513,000.0,029,000050,1,1,1,0,0,0,0,0,13502,86757211,13.581,04.024,,1,1,1,2*50<

I don't know what else can happen
THNK

Why would you put Traccar configuration in the wrapper conf?

Just because I read it in another post
That is not right?

Which post?

This post
https://www.traccar.org/forums/topic/input-string-error-number-format-exception-starlink-tracker/

That's incorrect comment from some other user. You have to put it in Traccar configuration, not wrapper.

I understand, you could guide me, currently the device is configured with port 5136, however it is not reflected on the platform