SinoTrack ST-906L/4G (UnKnown command code for UT:xx,xx,300 (Upload Timer) 300 value in CXZT
As I know, timer 3 is the heartbeat, and the unit is in seconds.
Tech suppprt replied that the 300 value refers to the connection between the server and tracker (i.e. Heart Beat interval of 5 minutes) The feedback from the technical staff is that you can ignore this settings.
SinoTrack Tech Support feedback states that there are no specific modification instructions for UT: Timer3 (Heart Beat Interval 300 seconds)
I have just accidently found the solution to setting ST-906L and ST-904L SinoTrack device trackers to accept Domain Name format but it can only be set using TracCar Device Custom Command Upload function and not via SMS command send method which failed earlier.
8040000 rodyeo.dyndns.org 5013
Note: The default pin is 0000 as above following after the command function code 804 for IP.
Select device,
Select triple dot,
Device function,
Text transport,
MyCar-ST906L-0123456789
RESTART
SYSTEM RESET OK
CXZT
ST906(70ELASCD)_TQ_V_1.0 2023/12/13 ID:0123456789 IP:45.112.204.242 8090 UT:10,10,300 VOLT:13.1V APN:net GPS:A-34-31 GSM:31
RCONF
ST-906L/4G,ID:0123456789,PW:1628,U1:0123456789,U2:0123456789,U3:0123456789,MODE:GPRS,POWER ALARM:OFF,ACCSMS:OFF,ACCCALL:OFF,GEO FENCE:OFF,OVER SPEED:OFF,VOICE:ON,SHAKE ALARM:OFF,SLEEP:ON,APN:net,maxis,wap,IP:45.112.204.242:8090,TIME1:10,TIME2:10,TIME ZONE:E8.0
UT:10,10,300
UT: AccOnTimer1, AccOffTimer2, UnknownTimer3
Anyone knows what is the secret send command for Timer3 ?
Thanks.
Rodney