REACHFAR RF-V51 config parameters
From a google search
ts#
reply with config info
von,[1-4]# / voff#
vibration alarm, 4 is lowest sens, mod command changes this alarm type too
non,[0-1?]#
noise alarm?
verno#
replies with version number
sms,[0-1]#
set sending of sms
aon,[0-1]#
battery alarm
url#
send LBS data or google maps link
gprsgps,[0-1],[0-1]#
set gprs funktion and continuos gps tracking function
upload,[sec]#
set tracking interval for continuos tracking
cr#
single positioning
worktime,[sec?]#
how long to track for single positioning
update#
???
monitor,[phone nr]#
silently calls this number
hon,[0-1]#
??? reply with the state is open/closed
find#
lets tracker ring
where#
track & no smsyes, i found the same, but no one of thats commands works, I tryed, the only two commands works once was "pw,123456,center,(myphone number)#" and "pw,123456,apn,apn-name,user,passw,lpm code#". but thanks for the answer.
The most logic thing would be, first send an email to company Shenzhen ReachFar to request the sms commands.
Yes, I did it before posting here to service@rf-gsm.com, and answer once 2 weeks ago, after this weeks i posted here.
Dear Carlos
Thanks for your using ReachFar GPS tracker.
This is Susan from ReachFar Tech, a professional GPS tracking solution and device manufacturer with over 10 years of experience.
May I know what kind of GPS tracker you like? or are you meet any issues during your GPS usage?
Please connect us feel free.
I am glad offer technical support for you, in the first, please offer following information to us:
- You company information
- ID numbers for your V51.
- Does your tracking system support TCP/IP gateway protocol? if so,please offer your server and port data. I need confirm your server gateway first.
Looking forward your feedback and glad to support you.
Best regards
Susan Chen
Sales Engineer
............................................................................
Shenzhen Reachfar Technology Co.,Ltd
General Inquiry:info@rf-gsm.com
Tech support: technicalsupport@rf-gsm.com
Service: service@rf-gsm.com
Phone:+86(755)83244037
Mobile/WhatsApp:+8613717148901 Skype: Susanchencrs
Factory address: 5F, Building A, Industrial road No. 86, Longhua new district, Shenzhen city, Guangdong province,China
(this was the answer, reply it with the requested information, and thats all, no new mails)
Their reply was not really helpfull. Just use the whatsapp number from above email to contact them. Then ask again.
done-not whatsapp of this number. nobody answer thanks anyway @Track-trace i will trying with other commands
well, to configure this device to connect with traccar server the sms is "ip,(your server ip or domain),5093 (watch's protocol port)# without the cuotes.
but it doesn't work the SOS button alert on web notification. the command "ts#" works, not the others.
well after a time, they send me this V50/V51 data protocol but (sorry for the ignorance) i don't know how to send the information to the devices. any one can help? any mini tutorial?. Thank in advance.
What do you want to send actually?
@Track-trace, hi thanks for answering, for example i need to change the upload time (time between messages to the server), by now the upload time is set in the devices at 600s (ten minutes) and i need to change it to for example to 30s. when I send command pw,123456,ts# i get this config info: Device response image. As you can see i need to change the upload time for better accuracy and later meke work the SOS button with traccar, all that data i think is in the pdf. I tryed with the command pw,123456, upload,30#, pw,123456,t,30s#, and other commands via sms and no response or change in the config.
When your device is online in your server set the upload interval by sending the custom command from the server itself (device popup window). Send custom command :
upload,30
Also try custom command:
Find
Check if your device rings (if it can make sound)
Let me know if it works
@Tack-trace, thank you for your answer, but that is my primary problem, I don't know how to send commands to the devices form the server. Canyou explain how to do it or url to a tutorial. I am used to the old 2g devices wich are more simple.
Ok, actually its difficult for me to show you since i am on vacation. But, you can login into your traccar server right?
Created a device and now it is online in your traccar web login right?
If so, on the map you should be able to click on the device and get the popup window or click on the left on the device panel. At the bottom of the popup window you should see an up arrow. Click on that and from there you should be able to select custom command. There you insert the shown command and sent it.
Hello everyone! I just bought 5 (five devices) RF-v51 devices from the company Shenzhen ReachFar, so, I am excited to configure them to use it with traccar, but, oh surprise! in the manual it only tells you how to configure the admin number and the apn, but no other information. Searching in the web I can't find data for other sms commands to configure them. Any help will be more than welcome. Any ideas or someone who has already been able to configure any of them?.
Thanks in advance.