Server Ubuntu
Traccar server 5.7
Protocol: Watch
While looking at Settings / Notifications i noticed that you have the option under Channels, to select Command.
If you do select Command, then you get the field Saved Commands.
So a command should be triggered when a Type has been met. For instance exit Geo-fence
When i select any saved command for instance: Request GPS position
which sends CR to the device. Then click Test Channels it shows the below errors
There is no difference when i first press Save or try with other working Saved commands.
(The saved commands that i have created earlier are tested and working when used from the popup window on the map or when send as Group command).
https://ibb.co/McB7mbd
Testing notification doesn't work for command currently.
Ok, i can confirm that the notification commands work when testing it with a real device.
Server Ubuntu
Traccar server 5.7
Protocol: Watch
While looking at Settings / Notifications i noticed that you have the option under Channels, to select Command.
If you do select Command, then you get the field Saved Commands.
So a command should be triggered when a Type has been met. For instance exit Geo-fence
When i select any saved command for instance: Request GPS position
which sends CR to the device. Then click Test Channels it shows the below errors
There is no difference when i first press Save or try with other working Saved commands.
(The saved commands that i have created earlier are tested and working when used from the popup window on the map or when send as Group command).
https://ibb.co/McB7mbd