NEW ST-902W Port 8090

Hello,

I just received a new ST-902W that supports 3G and the manual states the port to be used is 8090.

Which protocol is this?

The other ST models use port 5013.

Thank you,
Jason

Hi, sometime the 8015, but better if you send the log with HEX.
Regards

Traccar doesn't use ports 8xxx. Manual probably assumes that you use vendor's provided service, so it's completely irrelevant if you use Traccar.

Ok, I am waiting for the protocol specs to determine the correct port.

Thank you

Hello Carlos,

This is the log response for that device:

2020-07-11 01:05:09  INFO: [3f48886e: 5013 < 172.58.187.1] HEX: 7e0100002c0191712990320027000000003730313132542d3330300000000000000000000000000000003132393930333201313239393033321e7e

Thank you

Try Huabao protocol.

I switched the device to 5015 and still showing offline.

Hi, check the id, need to be 0+id, for example, if the id is 30090470202, need to be registered like “030090470202” With huabao protocol
Regards

Hello Anton and Carlos,

Switching the protocol to Huabao and adding the 0 prefix did work.

Thank you!

Hi, so.. check the apn and server ip or dns. Send the text command “rconf” from your cellphone and you will see the data.

Done, everything looks correct now.

Thank you again.

Ok. Good,
Bye
Cci