Have you tried KHD protocol?
Thanks a lot, it is working. I havent use that port.
It recognizes it is online, however it does not show the location. Looking at the log, it does show that messages with location are arriving.
Let's see the logs? Also, are you sure you're using the latest version of Traccar?
Im using 6.3 version.
2024-08-10 20:38:53 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:39:54 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:39:54 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:40:54 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:40:54 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:41:54 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:41:54 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:42:55 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:42:55 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:43:55 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:43:55 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:44:56 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:44:56 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:45:56 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:45:56 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:46:56 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:46:56 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:47:38 INFO: [T8cdbb2d0: khd < 186.103.30.218] 29298300232296b9452408102047380070889187308992000000007b64002000000001000000700d
2024-08-10 20:47:38 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005708324f30d
2024-08-10 20:47:57 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:47:57 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:48:39 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929a3002e2296b945240810204836007088918730899200000232fb00004c80001f00000012000000000000061002007c000d
2024-08-10 20:48:39 INFO: Event id: 34225769, time: 2024-08-10 20:48:39, type: deviceOnline, notifications: 0
2024-08-10 20:48:39 INFO: Position filtered by Calendar filters from device: 34225769
2024-08-10 20:48:57 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:48:57 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:49:39 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929a3002e2296b945240810204937007088918730899200000232fb00004c80001f00000012000000000000061002007c000d
2024-08-10 20:49:40 INFO: Position filtered by Calendar filters from device: 34225769
2024-08-10 20:49:58 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929b100072296b9450cf20d
2024-08-10 20:49:58 INFO: [T8cdbb2d0: khd > 186.103.30.218] 2929210005f2b10c6b0d
2024-08-10 20:50:40 INFO: [T8cdbb2d0: khd < 186.103.30.218] 2929a3002e2296b945240810205037007088918730899200000232fb00004c80001f00000012000000000000061002007c190d
How do you explain this:
Position filtered by Calendar filters from device: 34225769
I was trying to filter by device on the web, the is shown online. But it does not let you see the location where it is
I don't understand how your comment is related to the calendar filter.
My question is because I see the device that says it is online. But I don't get the location of it.
I drove the car for 15 min and on the platform I don't see data other than it is online.
As you can hopefully see from the logs, the location is filtered by the calendar filter that you enabled.
I hadn't seen that, it's already entering data and displaying it along with the run.
I have to check only the panic button. I activated it and it didn't work, but I don't know if it is disabled in the gps.
All is working now, was a problem with the button on my GPS.
Thanks a lot Anton.
Can you elaborate? So others can learn.
I tried with some ports, but it didn't work, I don't know if it is necessary to create the protocol. I have been trying to create one but I still had problems running the assembler.
This is an example of a message received in the log:
2929b100072296b9450cf20d
2929a3002e2296b945240810181537007090348730854000000112fb00004980001f00000010000000000000061002007b240d
This is the documentation: SP12-18-48 Standard Protocol V3.2
I am grateful for any support you can give me.