GT06E 3g Device

dtvea18 years ago

Hi,

With the shutdown of the 2g network here in Australia over the next 12-18 months, I am looking for a 3g compatible device to work with your software.

I have found the GT06E which is not listed on your compatible device list.
Will this work with the GT06 protocol?

Thanks
Dave

Anton Tananaev8 years ago

I should work with one of the protocols. See following page:

https://www.traccar.org/ports-for-tk-gt-and-other-gps-devices/

wongpong8 years ago

@dtvea1 ,Please share about GT06E.

dtvea18 years ago

Hi,

I will as soon as I have completed testing. The unit has just arrived.

Thanks

wongpong8 years ago

Hi @dtvea1 ,

I between the decision to buy and looking to buy on eBay to test. I do not see the setup settings Common Command List to point GT06E to Server.
How Common Command List settings to point GT06E to Server?

Thanks

Anton Tananaev8 years ago

What "Common Command List" are you talking about?

wongpong8 years ago

Hi @tananaev ,

“Common Command List” = “SMS command”
Edit SMS command to device setting.
See topic 7. Common Command List link below
http://www.jimilab.com/uploads/soft/151127/gt06e-manual.pdf

Thank

Anton Tananaev8 years ago
wongpong8 years ago

Hi @tananaev ,

My Case,

Operating System : Linux 64 bit
Traccar : version 3.6
Device : GT06E

GT06E

In state, Time Attibute(B) is incorrect not match Devices Last Update(A)
The impact is the result of date and time search that is not correct(C).

I try offset value with gt06.timezone (https://www.traccar.org/configuration-file/).

<entry key='gt06.port'>5023</entry>
<entry key='gt06.timezone'>25200</entry>

Not working, Tracker server log display

2016-08-20 14:22:46 DEBUG: [952A5A21: 5023 < 49.230.22.15] HEX: 78780a1344060200020040d5c10d0a
2016-08-20 14:22:46 DEBUG: [952A5A21: 5023 > 49.230.22.15] HEX: 787805130040ba7c0d0a
2016-08-20 14:22:46  INFO: [952A5A21] id: xxxxxxxxxxxxxxx, time: 2016-08-20 21:01:23, lat: 13.87785, lon: 100.57455, speed: 1.1, course: 335.0

please guide me and Thank, For document is great.

Anton Tananaev8 years ago

Time in the Devices table is the server time when last message from device was received. In State and Report it's the time that device reported. They don't have to be the same.

What timezone is configured on your tracker? I would recommend to use UTC/GMT.

Franka year ago

Please is there s command that can change IMEI of GT06E tracker