Error starting deamon traccar

flop9 years ago

Hi,

I get next error when starting the deamon.

sudo /opt/traccar/bin/traccar start
Starting traccar...
/opt/traccar/bin/./wrapper: 1: /opt/traccar/bin/./wrapper: Syntax error: "(" unexpected
Waiting for traccar..................
WARNING: traccar may have failed to start.

I'am running a vps with Ubuntu 14.04 LTS 64bit installed.

Who can help to solve this?

Regards,

Rob

Anton Tananaev9 years ago

What version of Traccar are you using? Also, what shell? It looks like a problem with Java Service Wrapper script.

flop9 years ago

Hi Anton,

Thanks for your reply. Do you have minute to look at my vps and install traccar by teamviewer?
Will be very appreciated. Sorry for my double post on the forum and github.

Regards,

Rob

Anton Tananaev9 years ago

I don't have time now, but I might have time to look tomorrow. Send me details by email please. Email address is on the support page or at the bottom of this page.

Superego9 years ago

Hello,

I have the same problem: deamon don't start.
Here's details:

user@user-OptiPlex-GX520:~/Desktop$ sudo ./traccar.run
Verifying archive integrity... All good.
Uncompressing traccar  100%  
./setup.sh: 5: [: -lt: unexpected operator
Detected Ubuntu or Debian:
The traccar daemon is already installed.
user@user-OptiPlex-GX520:~/Desktop$ cd /opt/traccar/bin
user@user-OptiPlex-GX520:/opt/traccar/bin$ sudo traccar start
sudo: traccar: command not found
user@user-OptiPlex-GX520:/opt/traccar/bin$ sudo /opy/traccar/bin/traccar start
sudo: /opy/traccar/bin/traccar: command not found
user@user-OptiPlex-GX520:/opt/traccar/bin$ sudo /opt/traccar/bin/traccar start
Starting traccar...
Waiting for traccar......................
WARNING: traccar may have failed to start.

Can you help me?

Anton Tananaev9 years ago

You need to check wrapper.log file for error message.

Superego9 years ago

Here is part of latest logfile:

Can you give me some insight what to do on that:


INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | Advice:
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | Usually when the Wrapper fails to start the JVM process, it is because
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | of a problem with the value of the configured Java command.  Currently:
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | wrapper.java.command=java
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | Please make sure that the PATH or any other referenced environment
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | variables are correctly defined for the current environment.
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | ------------------------------------------------------------------------
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  |
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | The configured wrapper.java.command could not be found, attempting to launch anyway: java
INFO   | jvm 5    | 2016/01/14 11:18:30 | wrapper  | Launching a JVM...
ADVICE | wrapper  | 2016/01/14 11:18:30 |
ADVICE | wrapper  | 2016/01/14 11:18:30 | ------------------------------------------------------------------------
ADVICE | wrapper  | 2016/01/14 11:18:30 | Advice:
ADVICE | wrapper  | 2016/01/14 11:18:30 | Usually when the Wrapper fails to start the JVM process, it is because
ADVICE | wrapper  | 2016/01/14 11:18:30 | of a problem with the value of the configured Java command.  Currently:
ADVICE | wrapper  | 2016/01/14 11:18:30 | wrapper.java.command=java
ADVICE | wrapper  | 2016/01/14 11:18:30 | Please make sure that the PATH or any other referenced environment
ADVICE | wrapper  | 2016/01/14 11:18:30 | variables are correctly defined for the current environment.
ADVICE | wrapper  | 2016/01/14 11:18:30 | ------------------------------------------------------------------------
ADVICE | wrapper  | 2016/01/14 11:18:30 |
FATAL  | wrapper  | 2016/01/14 11:18:30 | There were 5 failed launches in a row, each lasting less than 300 seconds.  Giving up.
FATAL  | wrapper  | 2016/01/14 11:18:30 |   There may be a configuration problem: please check the logs.
STATUS | wrapper  | 2016/01/14 11:18:30 | <-- Wrapper Stopped


Anton Tananaev9 years ago
It looks like you don't have Java installed or path for Java is not set up correctly.


Superego9 years ago
Ok. That helped! Now install is OK.


Thank you very much.


burnbird9 years ago
Hi, Anton!
I have the same issue:


user@user:~/traccar-server$ sudo /opt/traccar/bin/traccar start
Starting traccar...
/opt/traccar/bin/./wrapper: 1: /opt/traccar/bin/./wrapper: Syntax error: "(" unexpected
Waiting for traccar..................
WARNING: traccar may have failed to start.

server on ubuntu12
java -version gives:
java version "1.7.0_95"
OpenJDK Runtime Environment (IcedTea 2.6.4) (7u95-2.6.4-0ubuntu0.12.04.2)
OpenJDK Client VM (build 24.95-b01, mixed mode, sharing)

Anton Tananaev9 years ago
Ubuntu 12 is pretty old version. Also, what's the architecture of the system?


burnbird9 years ago
ohh, there is x64 cpu BUT x86 Ubuntu12 ))) I don't know why our admin made such strange config.
I will create a new instance with 'true' x64
thanks a lot for pushing me to the right way


burnbird9 years ago
everything is OK. sorry )
the problem was in installing x64 version on the x32 ubuntu.