Bugs EELink Protocol Decoder

this a bugs EELink Protocol Decoder ?

2017-09-23 18:58:03 DEBUG: [639D50B9: 5064 < 114.124.235.28] HEX: 676702001b213959c6aebaff41dcef0b8b978300000001fe000a36e30078fe01
2017-09-23 18:58:03  WARN: Geocoding failed - Empty address - GeocoderException (JsonGeocoder:74 < ...)
2017-09-23 18:58:03  INFO: [639D50B9] id: 868500020123196, time: 2017-09-23 18:58:02, lat: -6.92268, lon: 107.60982, speed: 0.0, course: 0.0
2017-09-23 18:58:14 DEBUG: [639D50B9: 5064 < 114.124.235.28] HEX: 676702001b213a59c6aec4ff41dcee0b8b977f00000001fe000a36e30078fe01
2017-09-23 18:58:14  WARN: Geocoding failed - Empty address - GeocoderException (JsonGeocoder:74 < ...)
2017-09-23 18:58:14  INFO: [639D50B9] id: 868500020123196, time: 2017-09-23 18:58:12, lat: -6.92268, lon: 107.60981, speed: 0.0, course: 0.0
2017-09-23 18:58:25 DEBUG: [639D50B9: 5064 < 114.124.235.28] HEX: 6767050020213b59c6aecdff41dce70b8b977d00000001fe000a36e30078fe010159c6aecd
2017-09-23 18:58:25 DEBUG: [639D50B9: 5064 > 114.124.235.28] HEX: 6767050002213b
2017-09-23 18:58:25  WARN: [639D50B9] error - Not enough readable bytes - Need 2, maximum is 0 - IndexOutOfBoundsException (... < EelinkProtocolDecoder:163 < *:247 < ExtendedObjectDecoder:58 < ...)
2017-09-23 18:58:25  INFO: [639D50B9] disconnected
2017-09-23 18:58:30  INFO: [ED2AFB86] connected

It works for me using latest code.

lates code ? I am using traccar 3.14

Latest source code:

https://github.com/tananaev/traccar

Probably the issue has been fixed after 3.14 release. In that case you need to wait for next release or build from source yourself.

I just ordered three from Ellen, so is there a timeline on next release of traccar?

Probably about a month from now.

ok thank you anton