Add a new device - Micro Prime AT Plus

I would like to see support for these. The protocol is attached.

The protocol is nearly identical to GL200/GL300 and I get location data using the GL200 protocol but I do not get battery level. It might be a simple fix to add this device to the current gl200 protocol.

Please advise!

Protocol: http://40.78.98.173/Prime%20AT%20Plus%20Interface%20Protocol_V1.22.pdf

Anton Tananaev9 years ago

I need some HEX message samples from tracker-server.log file.

QuikTrak9 years ago

Here is a few messages from the server log...

2016-01-25 20:56:31 DEBUG: [EF08A72A: 5004 < 209.198.195.40] HEX: 2b524553503a47544652492c3132303131332c3335313536343035333636303131342c2c302c312c312c31382c302e312c302c3233312e332c2d37362e3636303939372c33392e3833323538332c32303136303132353230353633362c2c2c2c2c30302c3130302c32303136303132353230353633362c3030303624
2016-01-25 20:56:32 DEBUG: [EF08A72A: 5004 < 209.198.195.40] HEX: 2b524553503a47544e4d522c3132303131332c3335313536343035333636303131342c2c302c302c312c31382c302e302c302c3233312e332c2d37362e3636303939372c33392e3833323538332c32303136303132353230353633372c2c2c2c2c30302c3130302c32303136303132353230353633372c3030303824
2016-01-25 20:56:36 DEBUG: [EF08A72A: 5004 < 209.198.195.40] HEX: 2b524553503a47544652492c3132303131332c3335313536343035333636303131342c2c302c312c312c31362c332e302c302c3232352e322c2d37362e3636303938332c33392e3833323538382c32303136303132353230353634352c2c2c2c2c30302c3130302c32303136303132353230353634342c3030303924
2016-01-25 20:57:37 DEBUG: [EF08A72A: 5004 < 209.198.195.40] HEX: 2b524553503a47544652492c3132303131332c3335313536343035333636303131342c2c302c312c312c31342c302e342c302c3233302e392c2d37362e3636303934332c33392e3833323537382c32303136303132353230353734332c2c2c2c2c30302c3130302c32303136303132353230353734332c3030304124
2016-01-25 20:57:37 DEBUG: [EF08A72A: 5004 < 209.198.195.40] HEX: 2b524553503a47544e4d522c3132303131332c3335313536343035333636303131342c2c302c302c312c31342c302e302c302c3233302e392c2d37362e3636303934332c33392e3833323537382c32303136303132353230353734342c2c2c2c2c30302c3130302c32303136303132353230353734342c3030304324
2016-01-25 21:01:15 DEBUG: [EF08A72A: 5004 < 74.126.90.204] HEX: 2b524553503a47544652492c3132303131332c3335313536343035333636303131342c2c302c312c312c31352c362e302c302c3233352e372c2d37362e3636313033312c33392e3833323532362c32303136303132353231303132312c2c2c2c2c30302c3130302c32303136303132353231303132312c3030304424

Thanks for looking!

Anton Tananaev9 years ago

I've tried to implement battery level decoding, but it's not so easy. There are too many different formats for GL200 protocol. I need to re-implement decoder, but it will take some time.

Peter7 years ago

Hi Anton, I could not see the Prime Model Prime Plus 2G device listed in the supported devices, made by Micron Wireless

http://www.micronwireless.net/our-products/prime-plus-2g/

NB the battery level is not important for me, as these are wired to the vehicle battery

warm regards
Peter