How To Capture ODB Data
You should be able to see OBD data in the "state" panel in the web app.
If you don't, you should provide HEX data for OBD message from logs and what data you expect to see.
please.
Could you tell me how to add the hex data to the system?
Thank you
You don't add HEX data anywhere. I need to see HEX data from Traccar logs.
ok I understand.
These are the data in HEX that I see in the log:
2017-06-13 20:30:17 DEBUG: [90A90FC7: 5001 < 186.9.134.82] HEX:696d65693a3836383638333032373832353533322c4f42442c3137303631333230333031342c2c2c2c302c302c302e3030252c302c302e3030252c302c302e30302c2c2c2c3b
If I use the "Hex Decoder" page the data is as follows:
HEX: imei:8686830xxxxxxx,OBD,170613203014,,,,0,0,0.00%,0,0.00%,0,0.00,,,,;
Thank you
Your device just sends zeroes. Wait till it sends something useful and see if it gets decoded.
He's right, I've changed the car device and now the data arrives.
Is there an area like the "Status" box where you can see only the OBD data?
No.
Ok, thank you very much for the help and patience !!!
so which traccar api endpoint should I be hitting to receive the OBD data?
Same as any other data.
Hi.
I am new to Traccar and have managed to operate the system and receive data from my GPS 306A device. Checking the log in "tracker-server.log", I see ODB data transmission registers, but I do not understand how I should do to configure Traccar to take that data and display it on the web page.
I will be grateful to orient me to show the ODB data.
Thank you