Sending device commands to Atlanta device (LC-100, Protocol: l100), not getting any response on the web application, but able to see the response in the logs
That's probably because we don't support responses for this protocol yet. Do you have the protocol documentation?
Hi Anton....thanks for the quick response.
Traccar already supports the device model LC-100 (via l100 protocol). We can track the device/vehicle in Traccar without any issue. The issue we have is with the Device Commands. When we send the device command, the device can receive it and also respond to the command. But we don't see the response on the Traccar Web App. As you notice in the previous message, I have shared the log information from Traccar. The first line is the command sent to the device and the second line is the device's response.
I am sending you the protocol document and also the device manual which has device commands (page 10, section 8).
Your device response with this to the command:
$863221045421144,ATL_9.5.7_LE_1.7_FLRNX
MC25MBR01A07
MC25_QuecOpen_GS5_SDK_V1.2_BETA1129A&I don't see anything in the documentation that would explain this format. It seems like it's not documented.
Hi Anton,
The response is just a text message and no further processing is required. It would be great if that text response can be displayed in the Traccar web application.
We are not facing a similar issue for the Teltonika and Concox devices when we send device commands. The responses are displayed in the web application.
The format needs to be documented.
Device Model: Atlanta LC-100
Protocol: l100
Command:
$MSG,VERSION<6906>&We are receiving logs below of the command sent and the response for the Atlanta devices.
We didn't get any response on the web application. When we tried sending device commands to Teltonika and Concox devices, we got a response on the web application. It is difficult to acknowledge whether the device is updated with the command or not.
How to fix this?