Queclink GV58LAU
can you please update the protocol version length length to 10? as per the packet structure the comma is the delimiter.
below examples :
+RESP:GTIGN,8020030303,IMEI,,0,0,,,,,,,,,,,01,0,,0.0,20200101000102,012F$
+RESP:GTSTT,8020030303,IMEI,,21,0,,,,,,,,,,,01,0,20200101000102,0130$
+RESP:GTFRI,8020030303,IMEI,,12238,10,1,0,,,,,,,,,,,01,0,0.0,,,,,0,210100,,,,20200101000201,0131$
+RESP:GTIGF,8020030303,IMEI,,0,0,,,,,,,,,,,01,0,,0.0,20200101003535,0156$
+RESP:GTIGL,8020030303,IMEI,,,01,1,0,,,,,,,,,,,01,0,0.0,20200101003536,0159$
Hola a todos. Les confirmo que funciona correctamente el GV58LAU en la demo demo4.traccar.org. Saludos y gracias!
Juanma00 podés compartir la configuración?
X algún motivo en mi server privado no da las coordenadas
Yo lo configure con estos sms y pude ver los reportes ok en la demo4:
AT+GTBSI=gv58lau,APN,,,,,,,0,,,FFFF$
AT+GTSRI=gv58lau,2,,1,demo4.traccar.org,5004,,0,,0,0,0,0,,30,0.0.0.0,0.0.0.0,FFFF$
AT+GTCFG=gv58lau,gv58lau,GV58LAU,0,0.0,,,3F,0,0,1FFFF,0,1,0,300,00,1,0,1,3FFF,0,4,FFFF$
AT+GTFRI=gv58lau,5,1,,1,0000,0000,0,60,1000,1000,,30,600,0,10,,0,FFFF$
I have the GV58CG, which has a 1Wire port to obtain the temperature from a sensor. Can traccar obtain this information?
you can use calculated attributes for that
Any ideas on how to do this?
I checked in the Communication String that the temperature value is being sent, but I cannot get the value.
I checked the database and the value is not being saved.
it is necessary that you share how the temperature data arrives to be able to help you
The data arrives in a message like below:
+RESP:GTERI,8020030303,867488060501326,,00000002,12354,10,1,0,0.0,198,67.9,-40.350086,-3.678764,20231229031550,0724,0005,9CFC,0D6E3F05,00,2.1,00005:55:13,,,,100,210100,,1,286A04090D00008E,1,01A8,20231229041412,031E$The information is, in this case, in the last fields.....,1,286A04090D00008E,1,01A8,....<<DeviceNum, DeviceID, DeviceType, DeviceData>>
The DeviceData is the temperature, from what I saw, Traccar already converts and does the multiplication, according to the manual, however, it does not record this information.
I understand that in this window https://ibb.co/pvSz6yh DeviceData appears with the temperature value as data, is that correct?
No. It does not appear on this screen.
I obtained this information by reading the protocol manual and checking with the communication String.
what you can do is to export a route report, the last column shows what the gps sends, there look if the data comes and see how the gps sends it, and from there create the calculated attribute you need.
there are 2 options:
1.- that the gps is not sending the data.
2.- that it does send it but not always, in that case you must add that attribute to the copy of attributes to keep the last data sent.
see if you can share the route report
Buen día.
Por fa me podrían compartir los comandos para apagado de motor del GV58LAU o en su defecto el @Track Air Interface Protocol del GV58LAU
Muchas gracias por el apoyo
Cordialmente,
If there was a breaking change in the format, it can definitely be the reason.