REACHFAR RF-V51 config parameters

oh! @Track-trace vacations are sacred! thank you very much for your help. I wil try to do what are you telling to me. I don't want to bother you more with this, I appreciate very much your help... I'll let you know how it went.

Track-tracea year ago

Yes, Just let me know, when i have time i will respond. Just start by answering the above questions.

Ps. Which country are you in?

@Track-trace, Hello again, done! i just send the message as you told me to and now is working more and less fine, but testing the device the shortest update time is 1 (one) min, less than that the device crashes. now I have to test the other commands to see if they works as the upload's coammands. I am from Argentina. Sorry for the late, if you want we can continue this after your vacations. THANK YOU VERY VERY MUCH. Enjoy your vacations!!!

heikoa year ago

The following commands work with my RF-V51:

pw,123456,center,number# (Set the master number)
After entering the master number (center), all commands work without entering the password pw123456.

ip,xx.xx.xx.xx,5093# (IP and Port setting for Traccar (xx.xx.xx.xx -> your server ip or domain)

ip,a.igps123.com,8888# (IP and Port original setting for the AnyTracking App)

apn,pinternet.interkom.de# (Set apn, here for Provider "Netzclub", Germany)

sos1,number# (Set Emergency contact number 1 )

sos2,number# (Set Emergency contact number 2 )

sos3,number# (Set Emergency contact number 3 )

ts# (device information)

find# (let the tracker ring)

Has anyone found out which command can be used to retrieve the location? dw# url# or where# doesn`t work. The support is not very helpful, has written that it is not possible with this model. I can't really believe that.

Track-tracea year ago

If your device is connected to traccar server, to request the position from the device you can send the command: cr

heikoa year ago

@Track-trace, many thanks for the tip. It works and helps me really.

Track-tracea year ago

@heiko,

Ok, i wonder though why do you send these commands through sms while once the device is connected you can just send it from the server as custom command through the popup window.

heikoa year ago

I'm still in the beginner's phase and have only been marginally interested in commands. But now I'm starting to understand more about it. ;-) Thanks.