TK228 Attributtes
If device works (you get location) on port 5009, it means that's the correct protocol.
But i can see obd data, i saw in another post from a 3 years ago from a guy that could ser in the log data from obd. This data os send it by the GPS because i saw it, but i can ser it in the log file what could it be? Is there a way to see the raw data send it by the GPS? Or i Just can see the hex in log file? Is there another part of traccar where i can see the string send it for the GPS to traccar?
Because i can't see hex code for obd in the log file
Hello @Anton Tananaev,
I have the same issue on this. I can't see the obd data and only the GPS coordinates.
This is the hex code i received:
2023-11-16 01:01:56 INFO: [T5e122eff: meiligao < 172.56.177.241] 2424006d6973105131347699553031303230302c562c333235302e373938362c4e2c31313533342e313735352c572c302e302c302e302c3136313132332c2c2c417c302e307c302e307c303230317c303030302c303237387c3030303030303030307c3030303030301b4c0d0a
2023-11-16 01:01:56 INFO: [T5e122eff] id: 6973134545443, time: 2023-11-16 01:02:00, lat: 32.84652, lon: -115.56953, course: 0.0
Hi, i have a GPS Tk228 i connect it to the port 5009 and i started to recieve info, but not the readings of the obd, i thougth it was a problem with the device so i point the GPS to the demo tracking system of the device, and i saw here are readings of the obd data (speed, battery, rpm, etc) i read in an older post that the driving behavior wasnt inserted in the attributtes field, and anton Ask for email so i cant saw if it was solved, im looking in the log file but Just saw an hex line that i copied and put it in the traccar hex decoder, and its Just location time engine status but no obd readings in the post of 3 years ago in the log appears an hex with the data of the obd, how can i check if traccar server is recieving the obd data, can i use a other protocol? Thank you in advance