Cantrack G500M -- can't seem to identify protocol

vrish2 years ago

Hi,
I bought a CANTrack G500M OBD device. I'm unable to identify its protocol. It doesn't seem to send any other information. I'm able to get GPS location from the device via SMS command (WHERE#), but it doesn't seem to want to work with Traccar.

I've tried all ports (eelink, chinese clones ports, vt200, etc) listed in the forum for similar device, but none of them seem to work. TC Forum

When I point it to port 5001, I get the below data, which is inline with the protocol document G500M Protocol 

676702001b000664d8a58001ddcd62086c343000011b019400314e54004bac03
676701000b0008086723205458628501

Any help is appreciated

Anton Tananaev2 years ago

The protocol link is not working.

vrish2 years ago

Try this one G500M Protocol

Anton Tananaev2 years ago

Try eeLink protocol.

vrish2 years ago

Tried that. No luck.

Any other suggestions?

Anton Tananaev2 years ago

Logs?

vrish2 years ago

EELINK worked, but with version 5.8.

FYI ... I was using version 5.6 and EELINK did not work with that version.

Thanks for the help Anton.