tk102-2 Tracker - New Protocol ?
You are right that about the identifier, but the port should be 5002.
Recieved a new Gps tracker from ebay TK102.
My hex is:
2016-08-03 19:13:51 DEBUG: [F674AC87: 5055 < xxx.xx.xx.xxx] HEX: 313630383034303331342c30343139373332393535362c4750524d432c3139313432362e3030302c412c323532322e303733382c532c30343931332e323436322c572c302e35322c37362e37342c3033303831362c2c2c412a35372c462c696d65693a3335313532353031313238353732342c313034db47
My decode hex is:
1608040314,04197329556,GPRMC,191426.000,A,2522.0738,S,04913.2462,W,0.52,76.74,030816,,,A*57,F,imei:351525011285724,104ÛG
which port this device uses ? I tested with the customer traccar android on port 5055 and is running . Can I use this port to the TK102 too? Thank you very much
There are a number of pages on the website about ports, including the first button (Devices). This one would be the most relevant to you:
https://www.traccar.org/ports-for-tk-gt-and-other-gps-devices/
I need only point to the correct port , or must also say what protocol to use ? Where do I set the protocol to be used ? Thank you
Each protocol has unique port, so you just need to point your device to the correct port.
I use the full IMEI or with only 12 digits ?
Thank you my friend , I could use port 5006 , and used the full IMEI .
Recieved a new Gps tracker from ebay TK102-2 . It has been setup and is reporting to Traccar server.
I have tried port 5001,5006,5036
It reports the following in the logs
which translates to the following in Text
What ports am i meant to be using for this device ? as i couldnt find any that resemble this output
Also , i assume by the converted text when i add this to Traccar i am meant to use "027044367522" as the identifier. It has been added using "027044367522" but the map does no update.
Thanks
Luke