Sinotrack HuabaoProtocol - OBD Information

Hi,

I am using the tracer application. Honestly, it is a great platform.

I purchased Sinotrack device and integrated with tracer. Now problem is it doesn't talk to the given protocol - h02. But I tried - HuabaoProtocol and it worked. But now the problem is I am not getting the OBD details like rpm, air pressure, coolant temp etc. However those information are available in their portal.

Could you please help me with that

Thanks,
Arindam

What kind of help are you looking for? Have you verified if it's a device or a server problem?

Hi Anton,

Good Morning. I recently bought SinoTrack OBD device. Which I tested it with their platform. It works find i.e. it show all the GPS information as well as OBD details (comprises of VIN, Fault codes, pressure, coolant temp etc.). When I connect the device with tracer it only shows the GPS details.

As per the document, initially i connect the device to h02 port, but it dint work - i.e. failed at authentication level. Then I used Huabao port and device registered successfully. Here is the payload which device is sending..

2021-09-09 05:54:55  INFO: [f6d53b30] id: 019172142971, time: 2021-09-09 05:54:54, lat: -37.70065, lon: 144.79929, c
2021-09-09 05:55:15  INFO: [f6d53b30: huabao < 49.184.181.112] HEX: 7e0200008e01917214297105640000000000000007023f4400003fcc143839363130323537313935343938363538373246300119800100810202c98202008c8301198401778502157586014a870200ea8801303232323930388c04000076488d0200008e0100a00b55303130312c5530313231057e
2021-09-09 05:55:15  INFO: [f6d53b30: huabao > 49.184.181.112] HEX: 7e8001000501917214297100010564020000487e
2021-09-09 05:55:15  INFO: [f6d53b30] id: 019172142971, time: 2021-09-09 05:55:14, lat: -37.70065, lon: 144.79929, c
2021-09-09 05:55:35  INFO: [f6d53b30: huabao < 49.184.181.112] HEX: 7e0200008e01917214297105650000000000000007023f4400003fcc143839363130323537313935343938363538373246300119800100810202c5820200858301198401778502157586014a870200e48801303232323930388c04000076488d0200008e0100a00b55303130312c5530313231217e
2021-09-09 05:55:35  INFO: [f6d53b30: huabao > 49.184.181.112] HEX: 7e8001000501917214297100010565020000497e
2021-09-09 05:55:35  INFO: [f6d53b30] id: 019172142971, time: 2021-09-09 05:55:34, lat: -37.70065, lon: 144.79929, c
2021-09-09 05:55:55  INFO: [f6d53b30: huabao < 49.184.181.112] HEX: 7e0200008e01917214297105660000000000000007023f4400003fcc143839363130323537313935343938363538373246300119800100810202c5820200828301198401778502157586014a870200e48801303232323930388c04000076488d0200008e0100a00b55303130312c5530313231407e
2021-09-09 05:55:55  INFO: [f6d53b30: huabao > 49.184.181.112] HEX: 7e80010005019172142971000105660200004a7e
2021-09-09 05:55:55  INFO: [f6d53b30] id: 019172142971, time: 2021-09-09 05:55:54, lat: -37.70064, lon: 144.79929, c
2021-09-09 05:56:15  INFO: [f6d53b30: huabao < 49.184.181.112] HEX: 7e0200008e01917214297105670000000000000007023f4400003fcc143839363130323537313935343938363538373246300119800100810202c5820200818301198401778502157586014a870200e48801303232323930388c04000076488d0200008e0100a00b55303130312c55303132317d017e

If I break one of the payload, I am getting following information.

7e 02 00 00 8e 01 91 72 14 29 71 00 39 00 00 00 00 00 00 00 07 02 3f 44 0a 08 a1 76 65 00 04 00 00 00 00 21 09 09 07 50 35 (Upto here is showing in tracer)

01 04 00 00 00 3a (Mileage on the car)
cc 14 38 39 36 31 30 32 35 37 31 39 35 34 39 38 36 35 38 37 32 46 (ICCID)

30 01 1c

80 01 00
81 02 02 ca
82 02 00 8c
83 01 19
84 01 77
85 02 15 75
86 01 48
87 02 00 ea
88 01 20
89 01 0c
8a 02 00 00
8b 11 4a 4d 30 42 4c 31 30 46 31 30 30 32 32 32 39 30 38 (VIN Number)
8c 04 00 00 76 48
8d 02 00 00
8e 01 00
a0 0b 55 30 31 30 31 2c 55 30 31 32 31 (Fault Code)
86
7e

If you notice all the 0x8x parameters are representing the OBD data which is not read by tracer.

Could you please help. If required, I can give you more samples. Please let me know

Thanks,
Arindam

Those are not supported currently. Do you have protocol documentation?

Hi Anton,

Thanks for the information. I am trying to get the documentation. Will share it with you once I get it.

Thanks,
Arindam

Hi Anton,

I have found the documentation. Please let me know how I can share it with you

Thanks,
Arindam

Upload it somewhere and share a link.

Here you go:
https://drive.google.com/drive/folders/1wqnoWrkywa1OdcHhCED_lvnkRtUMSDi1?usp=sharing

I can't find 0x8x parameters in your document. Am I missing something?

Ok, I am also asking them about those parameter. As I am not an expert, thought you might figure out something from these document.
Once I get those information, I will share it with you.

I'm facing difficulty finding 0x8x parameter for my golf grip