Hi everybody!
I got a bunch auf tk103b devices (PCB says Coban TK103b V1.06) and they don't answer on any sms nor can I set anything using the user_config.ini file. The sms all arrive though, the device is accessible using USB and registeres itself as USB drive.
I tried about everything I found on the internet ("adminpassword13142324" and "format") but I cannot get anything configured nor any feedback from the device.
The last about 50 of those devices I configured work without problems with the SMS configuration though they didn't have a proper USB port like these.
Thanks in advance!
jhs
No, begin#123456 or begin123456 obviously doesn't work either. It is pretty likely that the password isn't 123456 as stated in the printed manual...
It's really a big problem, because the password "adminpassword13142324" is the master password, if it didn't work, I have no idea what would solve it.
Hi everybody!
I got a bunch auf tk103b devices (PCB says Coban TK103b V1.06) and they don't answer on any sms nor can I set anything using the user_config.ini file. The sms all arrive though, the device is accessible using USB and registeres itself as USB drive.
I tried about everything I found on the internet ("adminpassword13142324" and "format") but I cannot get anything configured nor any feedback from the device.
The last about 50 of those devices I configured work without problems with the SMS configuration though they didn't have a proper USB port like these.
Thanks in advance!
jhs