Dear All,
I have 3 HI604x trackers, which work perfectly well with Traccar since years. From time to time there would be a scope to change something in their config (e.g. new target phone number, activate vibration detection...), and that's where one unmounts the device for PC connection (cumbersome, mechanically), sends an SMS command (cumbersome with MultiSIMs, as the "first" only collects all SMSs), or finds ones way to the right GPRS command ;-)
This is where I stand...
I'm unsure whether I need to change the config port on the device from 1943 default to something else (5063 like for TCP(/UDP)?).
I'm unsure whether the syntax for, say, command #10 (send coordinates via sms to phone) -i.e. $GPRS012xxxximeixxxx,TX201,#10,+49176xxxxxxxx,* - is correct and/or complete. (That's actually what the Haicom server claims sending)
I'm unsure whether all sms commands (list below) can be translated that way.
What should I write to the user-defined-command?
Can anybody please enlighten me?
Kind regards,
Christian
Code Format Function (0000)=PIN
100 #0000,100 Request all setting values back
151 #0000,151,0000000000,0000000000,0000000000 Set Security Phone Number.(10 Max.)
152 #0000,152,0000000000,0000000000,0000000000 Set SOS Phone Number (10Max.)
153 #0000,153,0000000000,0000000000,0000000000 Set SMS Phone Number (10 Max.)
154 #0000,154 Get Security Phone Setting
155 #0000,155 Get SOS Phone Setting
156 #0000,156 Get SMS Phone Setting
200 #0000,200,APN,USER,PASS Set APN
201 #0000,201 Get APN Setting
210 #0000,210,IP,TCP port,UDP port,config port,protocol select
#0000,210,60.250.68.23,9101,9120,1943,0
Set IP and Port
211 #0000,211 Get IP and Port Value
250 #0000,250,SMS,GPRS,LOG,Geo,Alarm,Ring,Speed,Sensor
#0000,250,0,30,0,500,60,0,20,10
Set Interval and Parameter
251 #0000,251 Get Interval Setting
300 #0000,300,Buglar,SOS,PWCUT,LBAT
#0000,300,0,1,1,1
Set Event
301 #0000,301 Get Event Setting
350 #0000,350,SMS_Send,GPRS,GEO,USB,WEB,SMS_Set,KEY
#0000,350,0,0,0,1,1,1,1
Set Buzzer
351 #0000,351 Get Buzzer Setting
400 #0000,400,Mode,Hour1,Minute1,Second1,Hour2,Minute2,Second2
#0000,400,1,0,5,0,0,0,0
Set Power Saving Mode
401 #0000,401 Get Power Saving Mode Setting
01 #0000,01,Pass,Pass
#0000,01,0000,0000
Set Password
10 #0000,10 Get GPS Data
11 #0000,11,Phone Number Talking Permitted
12 #0000,12,1 Relay #1 On/Off
13 #0000,13,1 Relay #2 On/Off
14 #0000,14 Tracker Reset
15 #0000,15 Inform Tracker send TX000 to Server
16 #0000,16,1 Set GEO Fencing Activate
17 #0000,17,1 Set GPS Fixed Alarm Activate
18 #0000,18,1 Set Moving Alarm Activate
19 #0000,19,1 Set Over Speed Alarm Activate
Dear All,
I have 3 HI604x trackers, which work perfectly well with Traccar since years. From time to time there would be a scope to change something in their config (e.g. new target phone number, activate vibration detection...), and that's where one unmounts the device for PC connection (cumbersome, mechanically), sends an SMS command (cumbersome with MultiSIMs, as the "first" only collects all SMSs), or finds ones way to the right GPRS command ;-)
This is where I stand...
I'm unsure whether I need to change the config port on the device from 1943 default to something else (5063 like for TCP(/UDP)?).
I'm unsure whether the syntax for, say, command #10 (send coordinates via sms to phone) -i.e. $GPRS012xxxximeixxxx,TX201,#10,+49176xxxxxxxx,* - is correct and/or complete. (That's actually what the Haicom server claims sending)
I'm unsure whether all sms commands (list below) can be translated that way.
What should I write to the user-defined-command?
Can anybody please enlighten me?
Kind regards,
Christian
Code Format Function (0000)=PIN
100 #0000,100 Request all setting values back
151 #0000,151,0000000000,0000000000,0000000000 Set Security Phone Number.(10 Max.)
152 #0000,152,0000000000,0000000000,0000000000 Set SOS Phone Number (10Max.)
153 #0000,153,0000000000,0000000000,0000000000 Set SMS Phone Number (10 Max.)
154 #0000,154 Get Security Phone Setting
155 #0000,155 Get SOS Phone Setting
156 #0000,156 Get SMS Phone Setting
200 #0000,200,APN,USER,PASS Set APN
201 #0000,201 Get APN Setting
210 #0000,210,IP,TCP port,UDP port,config port,protocol select
#0000,210,60.250.68.23,9101,9120,1943,0
Set IP and Port
211 #0000,211 Get IP and Port Value
250 #0000,250,SMS,GPRS,LOG,Geo,Alarm,Ring,Speed,Sensor
#0000,250,0,30,0,500,60,0,20,10
Set Interval and Parameter
251 #0000,251 Get Interval Setting
300 #0000,300,Buglar,SOS,PWCUT,LBAT
#0000,300,0,1,1,1
Set Event
301 #0000,301 Get Event Setting
350 #0000,350,SMS_Send,GPRS,GEO,USB,WEB,SMS_Set,KEY
#0000,350,0,0,0,1,1,1,1
Set Buzzer
351 #0000,351 Get Buzzer Setting
400 #0000,400,Mode,Hour1,Minute1,Second1,Hour2,Minute2,Second2
#0000,400,1,0,5,0,0,0,0
Set Power Saving Mode
401 #0000,401 Get Power Saving Mode Setting
01 #0000,01,Pass,Pass
#0000,01,0000,0000
Set Password
10 #0000,10 Get GPS Data
11 #0000,11,Phone Number Talking Permitted
12 #0000,12,1 Relay #1 On/Off
13 #0000,13,1 Relay #2 On/Off
14 #0000,14 Tracker Reset
15 #0000,15 Inform Tracker send TX000 to Server
16 #0000,16,1 Set GEO Fencing Activate
17 #0000,17,1 Set GPS Fixed Alarm Activate
18 #0000,18,1 Set Moving Alarm Activate
19 #0000,19,1 Set Over Speed Alarm Activate