I'm having some problems with Sinotrack ST-901A+ also.
If you send:
When you send the same commands but to your traccar server just replacing:
I also think it would be a good idea, since there are a lot of users using equipments from this supplier, to create 2 additional ports:
I've tried with port 5015 and does not work on the demo3 server. Inclusive I tried the complete "clone devices port list" and nothing, so Traccar, please help.
With Sinotrack IPs and his servers through 8800, no problem...
Hello Carlos Peña
Try to send and SMS with:
RCONF
This will give you all the parameters configured on the device.
I have tried with one of my equipments to demo3 and it worked, with the same behavior I described above but it worked.
RCONF
ST-901A+:ID:(***CENSORED***),UP:0000,U1:,U2:,U3:,MODE:GPRS,DAILY:OFF,GEO FENCE:OFF,OVER SPEED:OFF,SHAKE ALARM:OFF,SLEEP MODE:OFF,APN:orangeworld,
IP:95.216.239.168,5015,GPRS UPLOAD TIME:10,60,TIME ZONE:E8.0
And nothing... It does not work :(, so frustrated...
Ok.
Have you inserted the ID in traccar with the extra "0"?
If your ID is 123456789, you should put 0123456789 on traccar.
:-O .... You are a genius!!!, it works!!! thanks a lot!!!!. I hope I'm not the only one and It help to other people ;)
Glad I could help.
Hello
When using the ST-901A tracker, there were problems with the implementation of the data transfer protocol. The protocol you gave is a binary protocol, but We use a text one.
Please help with the following questions:
Thank you in advance.
I can also not get the SinoTrack ST-901A+ to work with Traccar. I tried port 5013, 5015 and 5030 (translated to 55013, 55015, 55030 for synology). I get entries in the log but it does not display a line with the id and location:
2021-05-12 12:42:04 DEBUG: [106fac77: 55030 < 188.206.98.190] HEX: 7e01000021030090615178000e002c012f37303131314b4d30364d2020203030303030303001d4c1423838383838f27e
2021-05-12 12:42:11 INFO: [106fac77] disconnected
2021-05-12 12:42:18 INFO: [7e2dd6ae] connected
2021-05-12 12:42:20 DEBUG: [7e2dd6ae: 55013 < 188.206.68.201] HEX: 7e01000021030090615178000f002c012f37303131314b4d30364d2020203030303030303001d4c1423838383838f37e
I have a older ST-901 with works perfectly with port 5030
Correction on previous post: I have a older ST-901 with works perfectly with port 5013
You got it working ? and how you get the logs ? where can I get the logs of what ST-901 is doing ?
5013 - worked for me too. I am able to see debug message
docker exec -it docker-traccar-mysql-traccar-1 tail -f /opt/traccar/logs/tracker-server.log
I confirm - the correct port is 5015 (protocol huabao) for Sinotrack ST-901A+
I also recently bought a same tracker. Protocol you can see here https://drive.google.com/open?id=1u0C_hFm5vJYskVWS7Npd3vtFN5xmPSWk.