GF07 MINI GPS
- Set the IP and one of the ports of your Traccar server in the device (if you can, I couldn't find a way to do this in the online documentation of the GF07).
- then follow these steps: https://www.traccar.org/identify-protocol/
By the way, this device is NOT a GPS tracker despite what's written on it. It will send a location within 25 square kilometers (not meters). The least dishonest seller I found claims an accuracy of 250 square meters (which is not precise at all by any means) but that may only happen in high density areas (large cities) where there are a lot of GSM antennas.
Treblig
Its a gps tracker alright. Normally locked but can be reprogrammed
@Anders Yuran
Could you give some insight into the reprogramming method?
Are we talking flashing? or are you just flipping some settings once connected via arduino/rpi/baite serial sorta thing?
I bought one thinking I could get it into traccar via gps :/
If you could point me in the right direction that would be very much appreciated.
Tengo dos equipos iguales, no los puedo configurar, alguien pudo ?
use command
SERVER,0,demo.traccar.org,5023,0#
please,
What port and protocol should I use for the Tracker GF07 MINI GPS?
thanks