Watch gps device from WONLEX
It doesn't seem to be supported. Do you have protocol documentation?
Hi Anton,
Yes, i asked for protocol from Wonlex, which email can i send to you?
You can send to support email.
I have sent email to support email, did you receive it?
I received an email, but there was no description of what it's for and no references to this thread, so I ignored it.
I also have a Wonlex watch, with this new protocol.
@Hai, where did you get the protocol information from? I've asked Wonlex but got no answer (yet).
Could you share it?
I finally found the problem. These new watches (like the Wondex GW100) send the information encrypted. You need a private key to decrypt the data. The private key must be bought to the maker of the watch.
So it is not possible to use them with traccar, unless you have the private key.
Hello every one,
I have also same problem , do anyone get solution. I have an device with 3G electronics .
device send string like this:- [some binary data]
In Document :-
All data in this agreement is in accordance with [manufacturer*deviceid*Content length*content]Formats,Where the vendor identity is fixed to two bytes,The content length is fixed to four bytesAssiiCode,High in the former position in the back,Such as00A2Indicates that the length is162.
1.Link Retention
Terminal send : [3G*YYYYYYYYYY*LEN*LK, step number, roll times, power percentage]
Example :[3G*8800000015*000D*LK,50,100,100]
Platform reply: [3G*YYYYYYYYYY*LEN*LK]
Example :[3G*8800000015*0002*LK]
Description: The instruction interval is sent, and if the terminal does not receive the reply data, the connection is re-established .
If you are receiving these codes (starting with ÿAQSH), then it means that the device you are using is encrypted. It is sending a key, waiting for a special response.
You should either get the decryption key (some manufacturers claim about 2000US$ for that) or ask for an unencrypted device.
I have bought them from Wonlex and they work fine, but you must ask for the decrypted ones (http://www.iwonlex.com/)
If anyone knows how to decrypt them, it will be more than welcome!
Thank u @Marc Vallribera. i ask them for decryption key.
Has there been anything new on this? I'm trying to get this working with my traccar installation as well and running into the same hurdle with the encrypted data.
@Austin Brigham not yet!
@Austin Brigham: I ended up buying the non-encrypted version.
Hello!
Did Traccar implement a WONLEX protocol?
If not, could anyone , please, share the protocol description to me!
The best way - please - put in on the protocol's page or put here a link to the description!
HI Anton,
I have bought a wath device from wonlex CHINA, and when i try conect to port 5093 and loged show that:
Help me how can i find the right port of this device?
Many thanks!