GOOME - OBD GPS Tracker GMOBD
Your device is using eelink protocol.
Hi Anton,
Thanks for your prompt response.
According to your recommendation I changed the listening port to 5064 (eelink protocol), but the problem persists, the logs I get in the Traccar server are:
2018-04-15 11:26:04 DEBUG: [6B17B763: 5064 < 200.7.247.249] HEX: 676702001c00125ad37b9afffc0f73f7948a8800000002e40000520900298c0100
2018-04-15 11:26:05 DEBUG: [6B17B763: 5064 < 200.7.247.249] HEX: 676702001c00135ad37ba4fffc0f61f7948a9100000002e40000520900298c0100
2018-04-15 11:26:37 DEBUG: [6B17B763: 5064 < 200.7.247.249] HEX: 6767030004001601fa
2018-04-15 11:26:37 DEBUG: [6B17B763: 5064 > 200.7.247.249] HEX: 67670300020016
2018-04-15 11:29:37 DEBUG: [6B17B763: 5064 < 200.7.247.249] HEX: 6767030004001701fa
2018-04-15 11:29:37 DEBUG: [6B17B763: 5064 > 200.7.247.249] HEX: 67670300020017
2018-04-15 11:32:38 DEBUG: [6B17B763: 5064 < 200.7.247.249] HEX: 6767030004001801fa
2018-04-15 11:32:38 DEBUG: [6B17B763: 5064 > 200.7.247.249] HEX: 67670300020018I consider that I am failing in the identifier of the gps tracker that I am putting in the web of traccar.
Please can you give me some clue to solve my problem
Regards,
oM
If it was id issue you would get an error. Everything is working fine; your device just doesn't report location data, it seems.
I can confirm that the protocol for Goome products seems to be eelink -> port 5064. worked fine for my Goome GM07W (the smallest OBD GPS Tracker I've ever seen btw!)
Guys do you know the command to set the protocol for Goome gps devices?
@Manuel, I have the same tracker - do you know which command must be sent via SMS to change the server and IP? Thanks!
@Marko
GPRSSET,1.1.1.1,5064#
Replace 1.1.1.1 with the IP address of your traccar server
Thank you very much Manuel. Did you have to set anything else? I am getting communication with server, but coordinates are stil 0.00 - probably have to wait a little more to get a GPS fix. Anyway, thanks again. Kudos.
It started to work - looks like it just needed a little bit of electrical juice :) thanks again!
Also anyone able to work with Goome GM02EW ? Tested but does not seem get connection from the test server.
Did you get your GM02EW working?
According to this post it is using GT06 protocol (Port 5023)
I managed to configure it using the SERVER command as explained here -> Screenshot
Nevertheless I don't get the connection to my server. Any hints?
The device is quite nice, very small and working from 5V USB to 24V trucks but the Goome Webservice was not (and now it is also expired)
Hi Anton
I am trying to register on my server of Traccar a Goome gps (model OBD GPS Tracker GMOBD) but I am not successful.
In the logs of the server I am shown:
In the web interface I have entered the complete imei, the last 11 numbers of the IMEI and the last 11 numbers of the IMEI plus the zero
Please your timely help always to solve the problem
Regards,
oM