Dear Tananaev
I wrongly post last message. Kindly ignore.
Thanks for providing such good software.
I want to use a GPS device very similar to ITS protocol- Intelligent Transport Systems in India. But there is slight difference in this. The manufacturer is Trackom and model no. is R-Locator.
The string is as below:
$RLP,N.A,2.0.2,NR,01,L,869867030181814,N.A,28022019,180155,1,28.688226,N,076.993570,E,0.0,80.26,17,201.0,0.89,0.60,VODAFONE I,0,1,25.0,4.20,0,C,14,404,11,415,F34A,51f7,415,13,840b,415,8,a3f7,0c2,5,ef77,415,5,0001,00,17888,47,*
The description of above string is as below:
$: Start Character
RLP: Header
N.A: Vendor ID
2.0.2: Firmware version, NR: Specify the packet type –, NR = Normal, EA = Emergency Alert, TA = Tamper Alert, HP = Health Packet, IN = Ignition On, IF = Ignition Off, BD = Vehicle Battery Disconnect
01: Unknown
L: L=Live or H= History
869867030181814: IMEI
N.A: vehicle registration number
28022019: Date (DDMMYYYY)
180155: Time (hhmmss)
1: 1 = GPS fix OR 0 = GPS invalid
28.688226: Latitude
N: Latitude Direction
076.993570: Longitude
E: Longitude Direction
0.0: Speed
80.26: Course over ground in degrees
17: Number of satellites available for fix
201.0: Altitude
0.89: Positional dilution of precision
0.60: Horizontal dilution of precision
VODAFONE I: Name of Network Operator.
0: 1= Ign On , 0 = Ign Off
1: 0 = Vehicle Battery Disconnected, 1= Vehicle Battery Reconnected
25.0: Indicator showing source voltage in Volts
4.20: Indicator for Level of battery charge remaining
0: 1= On , 0 = Off
C: C = Cover Closed , O = Cover Open
14: Value Ranging from 0 – 31
404: Mobile Country Code
11:Mobile Network Code
415: Location Area Code
F34A: GSM Cell ID
51f7: Neighbouring cell ID
415: Neighboring LAC
13: Signal Strength
840b: Neighboring cell ID
415: Neighboring LAC
8: : Signal Strength
a3f7: Neighboring cell ID
0c2: Neighboring LAC
5: Signal Strength
ef77: Neighboring cell ID
415: Neighboring LAC
5: Signal Strength
0001: 4 external digital input status (Status of Input 1 to Input 3 (0=Off; 1=On))
00: 2 external digital output status (0=Off; 1=On)
17888: Sequence Number of the messages (000001 to 999999)
47: Insures No error in transmission
*: Indicated End of the frame
Can we enable this device in same port of ITS (India) or new protocol will be developed. Please help.
ITS - Intelligent Transport Systems is a standard implemented by Indian government