Dear Team ,
i have galileosky 7.0 connected to 5 fuel sensors ( up To 8 ) over CanData port , Traccar car parsing Temp , Fuel Level for 5 devices , and i cant get Fuel Volume from the sensor , in can8Bit(x) i can see the temperature, in can16Bit(x) i can see fuel level , but i cant receive fuel volume , any idea ??
versionHw=130 versionFw=16 deviceId=100 index=5652 status=14848 power=12319 battery=4148 deviceTemp=42 output=244 input=0 adc0=0 adc1=0 adc2=0 adc3=0 fuelTotal=0.0 fuel=0.0 temp1=-40 rpm=0.0 can8Bit0=80 can8Bit1=77 can8Bit2=77 can8Bit3=77 can8Bit4=80 can8Bit5=0 can8Bit6=0 can8Bit7=0 can8Bit8=0 can8Bit9=0 odometer=150096 can16Bit0=24298 can16Bit1=123 can16Bit2=9842 can16Bit3=13779 can16Bit4=23037 distance=0.0 totalDistance=0.0 motion=false
Thank you in advance
Not all tags are decoded by Traccar.
Thank you Anton
, haw is the way to make Traccar decode them all what is the charges for this to show all tags, is there any cosumaization can be done?
Best Regards
It needs to be implemented.
Dear Anton,
When and how this can be done its a top important for us,
Thanks
Can I have a quotation over this
Send an email to support address to discuss it.
Dear Team ,
i have galileosky 7.0 connected to 5 fuel sensors ( up To 8 ) over CanData port , Traccar car parsing Temp , Fuel Level for 5 devices , and i cant get Fuel Volume from the sensor , in can8Bit(x) i can see the temperature, in can16Bit(x) i can see fuel level , but i cant receive fuel volume , any idea ??
versionHw=130 versionFw=16 deviceId=100 index=5652 status=14848 power=12319 battery=4148 deviceTemp=42 output=244 input=0 adc0=0 adc1=0 adc2=0 adc3=0 fuelTotal=0.0 fuel=0.0 temp1=-40 rpm=0.0 can8Bit0=80 can8Bit1=77 can8Bit2=77 can8Bit3=77 can8Bit4=80 can8Bit5=0 can8Bit6=0 can8Bit7=0 can8Bit8=0 can8Bit9=0 odometer=150096 can16Bit0=24298 can16Bit1=123 can16Bit2=9842 can16Bit3=13779 can16Bit4=23037 distance=0.0 totalDistance=0.0 motion=falseThank you in advance