TT8850 programming to Traccar

good afternoon my english is no very good, I do not know what I'm doing wrong, I have a problem, even though I am programming the tt8850 device, it does not report on the platform, it is already on port 7059 and open, its id is its device name 2726856, and the programming is this:

AT+GTBSI=TT8850,internet.movistar.ve,,,,,,,0000$
AT+GTQSS=TT8850,internet.movistar.ve,,,2,0,167.250.48.38,5079,,0,,60,0,0,,0001$
AT+GTCFG=TT8850,TT8850,2726856,0,5,0,7F,0,0FFF,0,0,1,60,0,0,60,90,,0002$
AT+GTNMD=TT8850,8,2,3,2,1800,1800,,,,,0003$
AT+GTFRI=TT8850,1,0,0000,0000,60,60,60,60,001F,1000,1000,,,,,0004$
AT+GTFKS=TT8850,1,,3,,,,,0005$

According to Traccar Device list you should be using:

TT8850 skypatrol port: 5021

You can also try TT8850 protocol, port 5079 in Traccar.

Yes, my device is programmed to port 5079 and it does not report anyway, I put it in TCP and UDP and nothing, I do not know if it's something wrong in the commands

Follow this guide:

https://www.traccar.org/troubleshooting/

I have followed the troubleshooting and I still do not know what I do wrong, I entered in the log file and this is what the device sends to the server, only thing that does not show the info, with another device from another model yes:

2017-12-12 13:16:58 DEBUG: [18103E40: 5079 < 186.185.94.128] HEX: 00042c303037462c302c47544652492c3032303130322c3836373834343030303636373533382c343134323732363835362c302c302c312c332c312e362c302c3939372e332c2d36362e3833303738362c31302e3438333339342c32303137313231323137313431382c303733342c303030342c303431412c343232302c36392c32303137313231323137313635372c4646363124

I have never used this device, but some ideas.

Did you run it through the hex decoder https://www.traccar.org/hex-decoder/

If so you got this:

,007F,0,GTFRI,020102,867844000667538,4142726856,0,0,1,3,1.6,0,997.3,-66.830786,10.483394,20171212171418,0734,0004,041A,4220,69,20171212171657,FF61$

Which is a good start as it shows location info, so you know it communicates with the server backend. Did you setup the device in traccar web interface using the ime?

There should be an info line in the log that shows the id: ime.

I am using in the interface, the imei and even the id number that i assign in the programming to the device

But what does the info line in the log show, is it the same as in the interface, device, identifier?

yes, they are the same since i register the team 2 times, both with the number and with the imei

I have tested the message sample from logs and it works with latest version of Traccar.

ok, also for that reason send the commands that I use to program the device, in case it is a bad configuration, to do it use the manager tool skypatrol tt8850 application and the commands that I send are those that are at the beginning of the topic

I have exactly you problem, alredy can you resolved?

I could not, I tried with another device and nothing, it's the same

if someone who reads this topic, has been able to schedule and report the TT8850, please put here the commands that you have used to program, so you know what we are doing wrong