TK 109 GPS Watch

Greetings

I bought a TK109 Watch GPS tracker and have been trying to figure out how to get it to work via Traccar.

I have tried various ports in the hope I would get it right. But Alas no luck so far. Any ideas what port it uses. It has an id number and a imei number what would be use to as an id on the server.

Just in case of mix ups this is the watch I am talking about.

Thank you for your help

Regards

Godfrey

Greetings

Since posting I reread the manual and found out this watch is actually a CRT19 if that helps.

Regards

Godfrey

Have you tried ports from here:

https://www.traccar.org/ports-for-tk-gt-and-other-gps-devices/

Are you using your own server or one of the demo servers? If demo, which one and what's the device id?

Hi

The watch is on and I have it set to use #803#40.122.161.243#5001#0000## demo.traccar.org

The watch has a ID number of 19154250107 and an IMEI No of 356823031879617 following other setup's I set my demo account to use 023031879617 but I have tried various combinations and permutations to try to get the watch to work on demo.traccar.org and the usual ports as per https://www.traccar.org/ports-for-tk-gt-and-other-gps-devices/ but not in the last 24 hrs.

Thanks again

Godfrey

Your device is using V680 protocol, correct port is 5016.

Hi Thanks Anton most appreciated :-)

Hi Guys

To get the watch to work you need to use the full imei number.

Once you set up take the watch for a walk and the web site will show your watches position.

Godfrey

Hello Anton, do you have a new communication protocol version like https://dl.dropboxusercontent.com/s/2hid9vaa2vno4jr/Communication%20Protocol.doc for Q50 watch?

All protocol documents are here:

https://www.traccar.org/protocols/