FM5300 and Ignition Status

Anazapta8 years ago

Hi Anton,

How to get notifications for Ignition ON/OFF for FM5300 Teltonika?
I receive other type of notifications from device but Email Notification for Ignition Status cannot receive.
So from Attribute Value from device i get: D1=1 (Alias: Ignition is ON - from teltonika document).
How to translate this to the web...

Regards,
Ermali

Anton Tananaev8 years ago

Server doesn't know that D1 is ignition. In the next release there will be an option to map from one attribute to another which should solve the problem.

Anazapta8 years ago

ok very good Anton, and keep going like this...you rock :)

netluca17 years ago

Hello Ignition is possible setting in more mode for Teltonika is possible use range Power Voltage, Motion or Digital Input this mode is possible control with configurator setting in System and I/O .

Anton is possible insert the possibility view or not in state panel?
If possible insert in attribute alias a flag for select if view or not in state panel.

Anazapta7 years ago

Hi netluca1,

Yes FM5300 provides 2 methods for ignition:

  1. with Digital input connected directly to the system of car and D1(Ignition) value is 1=ON, 0=OFF
  2. with external voltage when connected directly to the battery and there is a range High Voltage - Low voltage. Right? what values you put to the range values ?

Anton said that he will add this feature to the next release...