mistake in ignition

Anton Tananaev8 years ago

Most likely it is. That's why I need documentation for all of them.

Anduriño8 years ago

I have now the ServerTraccar V3.10 (with protocol H02 port 5013) for TWO "identical" devices (from different manufacturers): iTrac MT-1 and Sinotrack ST-901. Both with the same problem as @parelius and @SunyNiazi this thread.

(Sorry, I do not have manufacturers documentations either)

Anduriño8 years ago

...and even though its status appears inverted on the device screen, it changes when keyed contact. But I never get notifications by ignition (... others OK)

null
Anton Tananaev8 years ago

That's a completely different issue. Please don't make a mess out of this thread.

Suny Niazi8 years ago

at https://github.com/tananaev/traccar/issues/2145 post mr boonya said my car is off but ignition show yes.
i think he said mistake . because if his car was off , how speed is 1.4 km/h ?
ignition was correct at picture shown.
its an idea. :) may be wrong.

Anton Tananaev8 years ago

You are wrong. GPS almost never returns exact zero as a speed value. 1.4 km/h is within an error margin.

Anduriño8 years ago
I have now the ServerTraccar V3.10 (with protocol H02 port 5013) for TWO “identical” devices (from different manufacturers): iTrac MT-1 and Sinotrack ST-901. Both with the same problem as @parelius and @sunyniazi this thread. (Sorry, I do not have manufacturers documentations either)

DEVICE:
iTrac MT-1 Version: 08
http://s.aliexpress.com/meMNzuEZ

USER MANUAL:
http://www.i-trac.cn/admin/ewebeditor/uploadfile/MT-1%20User%20Manual%20V08_58.64.205.22.pdf

PROTOCOL:
https://drive.google.com/file/d/0B_yFbHhb-xvDNGJ3a2tnQ0VwcVZITWRDekwwajg2MDdwTGQ0/view?usp=drivesdk

Anton Tananaev8 years ago

I have create a table for comparison:

https://github.com/tananaev/traccar/issues/2920

Looks like it was correct value in 3.8, so I've reverted the change:

https://github.com/tananaev/traccar/commit/9d9d259927bce0a9f046c79f88eceb0085ccb489

Anduriño8 years ago

Thanks @Anton, and if you want to add a third column, this is the protocol documentation that SinoTrack manufacturer sends me for ST-901 device:

https://drive.google.com/file/d/0B_yFbHhb-xvDX3lXRElic0JvVjVVcGQ4VDhiMDZfQjQ2SExr/view?usp=drivesdk

Anton Tananaev8 years ago

Thanks, I've updated the table.