Gt06n 4G won't show up, have tried the trouble shooting

Cemara4 days ago

I've tried everything i think but the device still refuses to go online..
Install type : https://community-scripts.github.io/ProxmoxVE/scripts?id=traccar
traccar v6.6

  • Device type GT06N 4G
  • command sent to device : SERVER,0,ip public,5023,0#
  • I have port forwarded it, and ip public + 5023 is open on traccar port check tool, my ip is static so it never changes.
  • Have tried using ruhavik and their server and it works properly
  • Have tried traccar android phone and it works too..
  • opt/traccar/logs doesn't show anything related to the device, it shows few logs related to android traccar so the function is working
  • have tried SERVER,0,ip public,5001,0# as instructed in troubleshooting page but the logs still doesn't show anything related to gt06n

any thoughts?

Track-trace4 days ago

Can you read out the device config that ot actually points to your server?

Cemara4 days ago

This one right? using GPRSSET#

GPRS,ON;Currently use APN:internet,,;APN Auto set:OFF;SERVER,0,ippublic,5023;URL,http://maps.google.com/maps?q=
Track-trace4 days ago

I dont use those tracker, but you should have a way to actually check where the device points to (the server ip). Normally you could read out the config from the device.

The above actually has your actual real internet ip set?

You dont see anything in the server log when you use the port checker 5023 ?

Cemara4 days ago

Yes, it has my static ip address.
No there's nothing in the log related to port 5023 or gt06n,
but I only test it for like 10-15 mins though before changing it to ruhavik server. Was it not long enough?
There is however logs related to android traccar app which was generated almost instantly.
So traccar is working for my android traccar app at least.

Track-trace4 days ago

While using the port checker (and you state that it shows that the port is open) you should at least see somthing like this in traccar server log.

2025-04-17 11:31:50  INFO: [Tae4781ad] connected
2025-04-17 11:31:50  INFO: [Tae4781ad] disconnected

And if it works a device should connect within minutes.

Cemara4 days ago

I tried it again with both 5001 and 5023
unfortunately even after clicking port check tool
no messages appear in traccar server log..
Only messages from android traccar log is recorded..

Anton Tananaev4 days ago

It probably means there's something in the middle that accepts connections. How did you forward the port?

Cemara4 days ago

mikrotik,
using ippublic:port i can access traccar from external connection like my phone or from my home.
I've just tested using cloudflare tunnel, e.g lxc ip:port which redirects to traccar.website.com
e.g

SERVER,1,traccar.website.com,5023,0#
SERVER,1,traccar.website.com,5001,0#

but same issue persists, no log reports at all.

Track-trace3 days ago

Well as Anton states, there must be something blocking the connection. If the port is open on your router, your firewall, your server then at least with a portchecker you already should see that in your server log.

Anton Tananaev3 days ago

Are you sure you're forwarding raw TCP connection and not HTTP?

Cemaraa day ago

@Anton Tananaev
Sorry missed your reply,

traxxar1.JPG
traxxar2.JPG

Here's the port forward rule in mikrotik, i used tcp.
And the address works, i can open the page from wan connection outside traccar network with ippublic:5023