help with tracker j 16 gt06 protocol

I went to test other protocols and now it doesn't go back to gt06, I've already sent the command SZCS#PTL_SEL=2 and it's on the correct port, but the network led just keeps blinking, and in the h02 protocol it stays on constantly, but it doesn't recognize it in the traccar either, any help is welcome

2025-02-16 21:27:28  INFO: [T6d40f6d9] connected
2025-02-16 21:27:29  INFO: [T6d40f6d9: ulbotech < 199.45.155.106] POST / HTTP/1.1\r\nHost: 63.142.255.156:5072\r\nUser-Agent: Mozilla/5.0 (compatible; CensysInspect/1.1; +https://about.censys.io/)\r\nContent-Length: 54\r\nContent-Type: application/json\r\nAccept-Encoding: gzip\r\n\r\n{"jsonrpc":"2.0","id":1,"method":"web3_clientVersion"}
2025-02-16 21:27:39  WARN: [T6d40f6d9] error - Connection reset - SocketException (...)
2025-02-16 21:27:39  INFO: [T6d40f6d9] disconnected
2025-02-16 21:27:39  INFO: [T35ade678] connected
2025-02-16 21:27:40  INFO: [T35ade678: ulbotech < 199.45.155.106] 16030100ee010000ea0303f817ae134923b2cdb0f2fb82eae966931f474a169e306a5f90c5fd20c5f5f038209d05c0e9d010f19c1ea81f8d2609162432ffdbd36b3b8c8a499fd388ec9c55d50026cca8cca9c02fc030c02bc02cc013c009c014c00a009c009d002f0035c012000a1303130113020100007b000500050100000000000a000a0008001d001700180019000b00020100000d001a0018080404030807080508060401050106010503060302010203ff0100010000120000002b0009080304030303020301003300260024001d0020ed40a72f0a3a910668c3963faa6969a6a5baa23d07e8893bc2ddb78119882521
2025-02-16 21:27:40  INFO: [T35ade678: ulbotech > 199.45.155.106] *TS01,ACK:E05C#
2025-02-16 21:27:40  WARN: [T35ade678] error - Connection reset - SocketException (...)
2025-02-16 21:27:40  INFO: [T35ade678] disconnected

Doesn't seem like it's related to the server.

Hi.

Try with GT06SEL=1 command too. Be sure you're using port 5023, i don't understand why there just appears as "ulbotech".

Complete command would be
SZCS#SERVIP={ip of server}#SERVPORT=5023#PTL_SEL=2#GT06SEL=1#

And that doesn't seems to be related to server.

That's just noise. It's not from your device.

hi, RastreameMX. I've tried all the existing commands, even through the USB program, after going to h02 and returning to gt06 it doesn't pick up the network at all, I think I've broken the tracker forever, I'll have to buy another one

2025-02-17 18:18:51  INFO: [T93518a19] connected
2025-02-17 18:18:54  INFO: [T93518a19: gt06 < 187.114.92.122] 78780d0100000090765801420000d1980d0a
2025-02-17 18:18:54  WARN: Unknown device - 000009076580142 (187.114.92.122)
2025-02-17 18:19:09  INFO: [T93518a19: gt06 < 187.114.92.122] 78780d0100000090765801420001c0110d0a
2025-02-17 18:19:09  WARN: Unknown device - 000009076580142 (187.114.92.122)

Hi again.

I really don't understand if really your device is not reporting.

This time, in the log you share, there shows that your Traccar is receiving data from device with ID 000009076580142. Obviously it's discarding all positions, because you dont have added that id on your account on frontend. But you indeed are receiving positions from one device via GT06 protocol. Is that's your device id?

As observation, on J16 devices, ID changes a little bit depending what protocol do you use, is not same ID on h02, gt06 and huabao, because protocol limitations (h02 id limit is 10 digit).

Btw, i would recomend you not share info about your server IP on public forum.

Greets.

I don't even know how to thank you, because the ID was the IMEI that was pasted on the tracker, but it really changed, I put the one I'm learning in the log and it worked perfectly, thank you friend