Teltonika FMC130 stops working with the Traccar after firmware upgrade to a newer verion

Dmitry2 months ago

Having some stability issue on the FMC130 with 03.27.07.Rev.252 . But anything newer just stops working with traccar. Teltonika support was not very useful.
I did some debugging looks like traccar is getting the data points and responds with correct AVL package. But Wireshark shows that UDP message from server to FMC130 gets refused every time (Protocol:ICPM Message:Port Unreachable) .
including a screen shot of 2 devices one with older firmware one with newer .

Any help to figure out what is going on is appreciated.
3740adc05d409a2ef26217d4fe7d48d839c54b85.png

Cristian2 months ago

I'm using FMC130 with SL320 modem with this firmware without problems https://wiki.teltonika-gps.com/view/Special:Redirect/file/FMB.Ver.03.29.00.Rev.18_and_configurator.zip

and another with this version Ver:03.29.00_13 no problems

Dmitrya month ago

Are you using TCP or UDP protocol?

Cristiana month ago

TCP

Dmitrya month ago

Ahh, ok i use UDP with AVL response. Will try TCP but 1nce sim card recommends using UDP for some reason.