According to the manual you need to send:
804XXXX 45.112.204.242 8090
It seems that our provider here in the Philippines are blocking off SMS messages links... Is there an SMS command to factory reset the SINOTRACK?
Factory reset is made by sending "RESET" but I'm not sure if tracking server is set after this command.
Does the device answer on RCONF command send by sms?
After sending RESET you should get "SET OK". Then send RCONF to get actual configuration.
SIM card in ST-901 has funds to sens SMS?
Hello
How to put ST901M gps tracker on whatsgps plateforme. I have whatsgps account and i want to put this model of sinotracker gps on my whatsgps
Hi Yomason,
It looks like that the platform you mentioned, is not supported for the ST901. Best way is to contact the supplier what config is need to be made to make it compatible. It looks better to add it to a Traccar Server/Platform, as that supports the device.
Hello together,
i have problem with the sinotrack st901. I've configured it with the following parameters (xxxx stands for PW):
804xxxx IP.IP.IP.IP 5013 (Server IP and Port)
805xxxx 10 (Acc On 5 seconds)
809xxxx 180 (Acc Off 180 seconds)
now i have the following problem:
When the Acc turned on the tracker sends its positions as it should be every 10 seconds but additionaly it sends every 2 seconds an another dataset with an older timestamp and everytime the same data. here is an example (i changed tracker ID and location):
2024-11-08 13:07:01 INFO: [Td5ce349b: h02 < xx.xx.xx.xx] 2491710000000907100811244853023600010288450e000000fbfff5ff000000000000000001060152303d010d
2024-11-08 13:07:01 INFO: [Td5ce349b] id: 9171000000, time: 2024-11-08 10:07:10, lat: 40.00000, lon: 10.00000, course: 0.0
2024-11-08 13:07:03 INFO: [Td5ce349b: h02 < xx.xx.xx.xx] 2491710000001207210811244853028800010288640c000000fffff5ff000000690000000001060152303d010e
2024-11-08 13:07:03 INFO: [Td5ce349b] id: 9171000000, time: 2024-11-08 13:07:21, lat: 40.00001, lon: 10.00001, course: 0.0
2024-11-08 13:07:05 INFO: [Td5ce349b: h02 < xx.xx.xx.xx] 2491710000000907100811244853023600010288450e000000fbfff5ff000000000000000001060152303d010f
2024-11-08 13:07:05 INFO: [Td5ce349b] id: 9171000000, time: 2024-11-08 10:07:10, lat: 40.00000, lon: 10.00000, course: 0.0
2024-11-08 13:07:07 INFO: [Td5ce349b: h02 < xx.xx.xx.xx] 2491710000000907100811244853023600010288450e000000fbfff5ff000000000000000001060152303d0110
2024-11-08 13:07:07 INFO: [Td5ce349b] id: 9171000000, time: 2024-11-08 10:07:10, lat: 40.00000, lon: 10.00000, course: 0.0
The dataset with the timestamp 13:07:21 is a right one which comes every 10 seconds. But my problem are the other datasets with the timestamp 10:07:10.
I wrote this already to sinotrack and this was the reply:
reply from engineer : There is a color of data that represents the data transmitted in the blind area, which means that there will be a supplementary point. If you respond, the device will not continue to transmit. The purpose of adding points is to make the data location more accurate and the route trajectory better.
As i understand the tracker is waiting for a response of the server, but does traccar server responses?
The main problem I have here is that my database is growing extremely quickly. I have 70 of these trackers that are causing the traccar server to crash.
I hope someone can help me with this fault.
Thanks in advance
regards Daniel
I solved this problem by modifying the sources and recompiling traccar.
More info here: https://www.traccar.org/forums/topic/st-901l-4g-protocol-and-update-intervals/#post-102163
Ok i have traccar Ver 6.4 Is this already compiled in this version?
if not - maybe you can write me a litte How To?
Thanks in advance
I've used this howto: https://www.traccar.org/build/
If you want recompile version 6.4 you should use propper git checkout after clone, I think it should be git checkout v6.4, and than modify sources and compile.
It would be good if you can contribute back.
Thank you very much for your help. I have now tested it and replaced the tracker-server.jar and the jars in the lib folder after compiling. i also changed the config xml.
The log now looks a little different and shorter but unfortunately the positions of the vehicles aren't working. The vehicles on the map doesn't move. It seems like the server hangs.
for me this is a really big problem - i have 80 of this trackers and i can not send it back to Sinotrack -> but surely i will never buy these trackers anymore..
i hope someone of the PROs here can help me with this modest situation
Thanks in advance
Hi,
I've read your posts again, and I'm not sure if your problem is the same as mine.
If you take a look on my fragment of logs: https://www.traccar.org/forums/topic/st-901l-4g-protocol-and-update-intervals/#post-102131 you will see that I had text message every 180 seconds, and binary message every 2 seconds. All my binary messages had an invalid timestamps, so I made a traccar source modification to ignore all binary messages.
My logs changed this way, that binary messages weren't decoded, only the text ones are decoded (and I guess: the were not saved in database). However, all messages are still received by traccar.
In your fragment of logs all messages are binary messages. Some of them with valid timestapmp, and the rest with invalid one. So if you does not have the text messages than my modification is useless for you.
If I could, I would like to ask a few questions:
Regards,
Marcin
Need help! since i started updating the IP and PORT incorrectly (804XXX IP PORT), my ST901AL 4g started showing offline in the sinotrack app. Can't find a way to delete the IP/PORT. I can change it to 0.0.0.0 0 or anything else but it doesn't help to restore the LINK (online) in the app.
Is there a command to delete the IP/PORT (like deleting the control number using the D10X#)? Thanks!